- or
No existing idea results
- ~ No ideas found ~
36674 results found
-
Logi+ crashes after sleep
Yours stupid program Logi+ is working very poorly, It hangs after sleeping and the mouse switches to a different cursor speed mode.
If it continues to be this ****** I'll just throw out all the logitech stuff and buy some ******* razer garbage.
Do you hear that? Logitech is becoming as garbage as a razer, don't be a razer.
Even the ****** armory crate software from asus started working better then yours1 vote -
Ukrainian language
Hello,
I would like to kindly suggest adding Ukrainian language support to the Logi Options+ software. This would greatly improve the user experience for Ukrainian-speaking customers.
Thank you in advance!1 vote -
mouse operation
would like to know what the other buttons on the
mouse do and how to access them
I didn't find any instructions or diagrams1 vote -
Print Screen
For many years, there was a dedicated "print screen" (or similarly worded) key which, when pressed, would copy my screensaver graphic, and save it to a DropBox folder. With my new MK670 keyboard, there is supposedly a key (F7) that will copy my graphic, but absolutely nothing happens. I cannot use a two-key function, because the first key (alt, cntrl, etc) kills the screensaver graphic before anything gets copied. How can I fix this so I can save the good graphics for future use in my graphics programs?
1 vote -
M575 parameters disapear
How do you recover your M575 parameters that keep disapearing. Thank you for your response
1 vote -
Logi Options+ not supporting for MX Master 2S
New Logi Options+ not supporting old mouse MX Master 2S. Not recommending upgrade also I recommend to disable update option on original app.
1 vote -
STOP BREAKING SOFTWARE BECAUSE YOURE BORED
Where are the things I could do the the old options and why can I no longer use it?! No Flow that I used all the time?
1 vote -
disable Logi Options+ CapsLock
I'd like to disable Logi Options+'s intervention when using the Caps Lock key on Mac, so that it follows the operating system's rules.
1 vote -
Ditch AI
Having an "AI Prompt Builder" as part of peripheral hardware control software is absurd. It's something one would expect to see in a parody of modern software design. You should should be ashamed of yourselves.
1 vote -
Quality of Life suggestion: Miniature Logi Options+ using Taskbar
This suggestion is mostly a small quality-of-life feature for Logitech Webcams. An feature of this level can be implemented for Logitech microphones, however, I have not taken that into consideration in this thread/post.
With that out of the way...
Currently, if you want to tweak basic webcam settings on a Brio (or any Logitech webcam), you have to open the full G HUB or Logi Options+ app. While the apps are generally suffice, launching the whole thing just to make a small adjustment can be a bit of a hassle, especially while you can be in the middle of a stream, video call, or recording session. Therefore....
Idea:
Let users right-click the Logi Options+/G-HUB taskbar icon to access a minimal/miniature webcam control panel, maybe even with a hotkey shortcut. It could show:
Sliders for white balance, exposure, and brightness
Fast access to saved webcam presetsI have included an video demonstrating what I mean by an "miniature webcam control panel" using GHUBs interface for this example.
I think this is something a lot of users would benefit from as something like lighting conditions could change throughout the day.
Thats all.
This suggestion is mostly a small quality-of-life feature for Logitech Webcams. An feature of this level can be implemented for Logitech microphones, however, I have not taken that into consideration in this thread/post.
With that out of the way...
Currently, if you want to tweak basic webcam settings on a Brio (or any Logitech webcam), you have to open the full G HUB or Logi Options+ app. While the apps are generally suffice, launching the whole thing just to make a small adjustment can be a bit of a hassle, especially while you can be in the middle of a…
1 vote -
Critical memory leak
This software is ****. You cannot even fix the critical memory leak for few months already. Immediately after startup, it uses 3.9GB of RAM and eats ~5MB more each second.
1 vote -
Остановка инерционной прокрутки при окончании страницы
Пожалуйста, добавьте магнитную остановку при переключении фокуса окна и при окончании страницы, я вас очень сильно прошу. То, с чём я сталкиваюсь очень часто при использовании мыши, это то, что я могу раскрутить колесо вниз, чтобы долистать сайт/переписку и колесо продолжает крутиться, я этого не замечаю, перевожу мышь на другое окно и по инерции начинает крутиться уже оно. Было бы очень круто, если бы колесо автоматически останавливалось в таких сценариях.
1 vote -
Lost configuration for M575
This AM, my configurations for the M575 are not fonctionnal. This seems to be a recurent event since I purchased numerous M575 in replacement to my M570.
1 vote -
TOO MUCH ZOON IN/OUT WITH WHEEL
TURNING THE CENTER WHEEL ON THE MOUSE CREATE A VARY LARGE ZOON IN OR ZOON OUT ON CURTAIN WEBSITES. I NEED TO REMOVE OR TURN YOU SOFTWARE OFF WHEN I AM USING THESE WEBSSITES.
1 vote -
MX Master 3S連結Logi Option+問題
一直backend connection problem，從dongle換成藍牙還是一樣，每次一開機就會接不上，要一直按click here to launch backend或者是重啓服務裡的optionsplusupdaterservice，實在很煩
1 vote -
Logi Options+ Stuck on PC Startup
I am experiencing issues with Logi Options+ and I believe it may be linked to Logi Options+ Agent.
When I turn on my computer or wake my computer up from sleep mode, it takes several minutes for the Logi Options+ software to recognize my Logitech MX Master 3S Mouse. I have attached a few screenshots of how the Logi Options+ Agent process behaves in task manager when I first turn on my computer and when the software starts to detect my mouse (several minutes after startup).
1 vote -
Need help
Two problems:
1) having trouble finding settings to change laser options
2) login change password not working1 vote -
M4/M5 issues
i don't know how but i think there was an update and now i can't use my m4 and m5, it works breifly on disconnect and connect but that's it
1 vote -
FCP Plug-in Fails to Install
I purchased the MX Creative Console due to the announcement or the Final Cut Pro compatibility. Originally, I intended to purchase the Loupedeck CT, but discovered that Logitech had purchased that company.
As Logitech knows, the FCP Plug-in fails to install and the troubleshooting tips do not resolve this issue. So right now, I'm sat with a $200 capital cost for a product that is 100% failing in its capability claim.
Further, I'm told by Sali (ticket no. 15365952) that there is no ETA on resolution, there is no ETA on a fix, etc.
I view this as a failed product launch. Rather than waiting on resolution, it seems that I should return the product. Please advise me as to why I would even trust Logitech to fix this product launch?
Thank you,
JohnI purchased the MX Creative Console due to the announcement or the Final Cut Pro compatibility. Originally, I intended to purchase the Loupedeck CT, but discovered that Logitech had purchased that company.
As Logitech knows, the FCP Plug-in fails to install and the troubleshooting tips do not resolve this issue. So right now, I'm sat with a $200 capital cost for a product that is 100% failing in its capability claim.
Further, I'm told by Sali (ticket no. 15365952) that there is no ETA on resolution, there is no ETA on a fix, etc.
…
1 vote -
Switch Which Computer is Controlled by Mouse with Keyboard
The device switch buttons on the mx keys for business should also switch which computer the mouse is connected to.
1 vote
- Don't see your idea?