4459 results found
-
mx master 2s
dopo l'ultimo aggiornamento il mouse non si muove più
1 vote -
Back button goes too far back.
I have an M510. Every - EVERY - time I use the side "back" button it goes back 2 pages instead of one, many times losing my place on many pages. Can you add a control to make that impossible? So that it only goes back one page no matter what?
1 vote -
鼠标滚轮频繁失效问题
鼠标的滚轮总是莫名的失效，每次失效后没有阻尼了，我必须打开应用设置后才能恢复正常，几乎每天好几次这种情况，请问怎么处理和根治问题？
1 vote -
Resey settings
Worst app. Horrible. Made a mistake choosing Logitech. Every 3 days there is an update of the software and each time it updates, the settings for app specific actions fail to work What nonsense is this? Did not expect from such a renowned company
1 vote -
Logi Options+ MacOS Memory Leak
On MacOS, the Logi Options+ application appears to have a pretty extreme memory leak problem. Upon initial launch, the application uses about 50 MB of ram, but after just a couple of days, this usage is well in excess of 300MB and after just 2 weeks can be well over 1GB in ram consumption.
There is also no option to stop automatic software downloads, only firmware update checks, which is problematic in and of itself, since downloading a large file while on a metered or slow connection can be costly or disruptive to productivity.
Furthermore, memory leak issue has only…
1 vote -
Logi Options+ Exits / Crashes when using Monitor based KVM
I think I've suggested this before, but the problem I see is as follows. I have multiple machines, but I DO NOT use the Logitech receivers and buttons on the keyboard to access them ... I use a monitor with an in-built KVM in it to switch between the machines - it just works better for me.
But what seems to happen is that after a while, if I'm away working on my Windows based machine, Logi Options+ on the Mac either quits or just disappears - perhaps because it hasn't "seen" the devices for some time.
I'd really prefer…
1 vote -
Updated version no longer sees the connected MX Master 3 mouse
Updated Logi Options+ to v1.70.551909 and it no longer sees my MX Master 3 mouse
1 vote -
Missing: "zoom using scroll wheel" (Critical deal breaking feature) makes Master 3S a giant leap backwards!
I am highly frustrated, I tried Logi Options+ multiple times over the years & complained each time about the missing "zoom using scroll wheel" & went back to the old Logitech options.
Now with my brand new mouse Logitech is forcing me to use their half baked software……..!!!!!!!!!!! THIS IS BULLSH!T!!!!!
Both my MX Master 3 & MX Master 3 for Mac have failed in multiple ways (very unreliable hardware btw... anyways, that's a whole different rant) my last MX master 3 would drop my clicks when dragging something, the other one has scroll wheel failure, I really did not…
1 vote -
M720 left button drag issue
M720 Trathlon mouse left button drag is havong issue how to resolve the issue
1 vote -
Flow doesn't properly bring mouse/keyboard across to 2nd computer
I'm using Flow between a Mac and a PC, and about 50% of the time that I "drag" the mouse from one computer to the other, the keyboard/mouse don't map properly. The main left/right click buttons on the mouse do different behaviors and the Control/Command buttons on the keyboard do different behaviors. I fix it by dragging the mouse back to the original computer, and then back over, and that usually resolves it. It happens going both directions, PC to Mac and Mac to PC. This is a big annoyance, especially for a keyboard/mouse set (MX Keys / Master) that…
1 vote -
鼠标自定义在重启后失效
自定义侧键后，重启电脑，原自定义内容就没有了，恢复为默认设置，再有使用历史数据也无法写入鼠标，请解决！联系邮箱：erpa@163.com
1 vote -
windows 10 low menu bar problem
with new M720 mouse and this soft constantly windows lower menu bar is corrupted clicks are dissabeled.i use windows 10
1 vote -
Logi Prompt Builder stutters my mouse
My MX Anywhere 3 mouse stutters every few minutes. This started happening after Logi Options was auto-updated this morning and installed the Logi Prompt Builder. How do I turn this thing off?
1 vote -
UPDATE ISSUE
whenever there is a software update, it resets my mouse settings, AND it saves it to backup. So I both, lost my settings, and my backup. and it is the 4th time this happens. Can't the best mouse company fix this anoying issue?
1 vote -
Can't customize M500 mouse when MX Keys Mac is installed
I have the MX Keys for Mac (Bluetooth) and the M500 Corded Mouse. Your "Options+" software doesn't support the mouse, and the older "Options" software that does support it won't let me get past the "MX Keys Mac is not supported in Options. Please use Options+ to configure it." warning when I open it.
1 vote -
It Sucks
Your latest version sucks the PC. It is firing off multiple versions and Microsoft Edge which I do not use. I am going to remove it.
1 vote -
A scrolling issue and no clear instructions
My mouse a model 720, works pretty well most of the time, but when you scroll and then release the device it often continues to scroll from where you left it for about a second. It then stops and you have to handle the mouse again to put it in the desired spot. Also, the three programable tabs on the side are not easy to reset or reprogram and I can not find instructions on how to do so.
1 vote -
stuttering mouse
please help with the stuttering problem. it is really bad.
1 vote -
Not running in the background
Logi Options + should be able to run in the background otherwise all of the customisations are useless.
1 vote -
Sneltoetsen zijkant werken niet voor copy and paste
Hoi! De muis functioneert niet helemaal goed, want ik krijg de zijtoetsen niet ingesteld voor KOPIEREN en PLAKKEN. Hoe zeer ik dit ook probeer, ook na een aantal bug fixes van jullie kant: Het werkt niet. De functionaliteit van de zijtoetsen blijft staan op VORIGE en VOLGENDE. Ik heb de muis gekocht vanwege deze copy-paste-functie, dus hoor graag wat jullie hier aan kunnen doen. Hartelijke groet! Judith
1 vote
- Don't see your idea?